|
_JPG.jpg)
G-II Stage 3 Hushkit developed by TAS
|
TAS develops non standard repairs; dented wing Leading Edge
|
TAS’
Engineering offices in Van Nuys.
|
TAS team developed the Jetcruzer 450, first flight shown here.
|
_JPG.jpg)
TAS is a leader in 16G seat installations. This dummy used during
testing.
|
| 
TAS
designed a 9G wing for the Omega II |
The TAS Founders with the Omega II at Oshkosh
|
TAS developed icing analysis for the belly pod on this Dash
7
|
Mesh model used to develop icing analysis for Dash 7 aircraft
|
Mesh
Model used to develop icing analysis |
|
TAS developing a side door for a special C-130
|
TAS developed detail design for this BAC 1-11 Stage 3 hushkit |
A-3 with TAS developed modification.
|
Special Missions A-3 ready for flight.
|
A-3 with special nose radome.
|
|
Static testing of special A-3 Nose.
|
A-3 with special belly pod radome supplied by TAS.
|
A-3 belly radome ready for mating.
|
A-3 Radome attach flange being installed.
|
A-3 Radome attach flange being installed.
|
|
Low speed Aero model of A-3 belly pod.
|
Hi speed Aero model of A-3 Belly pod, note shock wave.
|
Static & GVT testing of special A-3 Nose
|
Static testing of special A-3 nose.
|
Static testing of special A-3 nose.
|
|
A-3 with special radome and extension.
|
A-3 with special radome.
|
Static testing of special A-3 nose.
|
Hawker 800 belly pod icing/aero analysis showing ice shedding
streamlines.
|
Special Hawker 800 modification with a belly pod radar system
installation.
|
|
GeoSAR G-II radar mapping aircraft with sample map.
|
 GeoSAR
G-II aero mesh model, top view. |
GeoSAR G-II aero mesh model, bottom view.
|
Typical map generated by GeoSAR G-II
|
707 hushkit development with winglets
|
|
707 winglets designed by TAS.
|
707 modified with hushkits and winglets.
|
707 winglets designed by TAS.
|
707 winglets designed by TAS.
|
707 hushkit development with winglets
|
|
707 Stage 3 hushkit, TAS developed inlet ring design and ejector
cowl.
|
707 Stage 3 hushkit, side view of ejector cowl.
|
707 Stage 3 hushkit, side view of ejector cowl.
|
707 winglet substructure finite element model
|
707 winglet finite element model showing skin stresses
|
|
Stage 3 hushkit ready for flight.
|
WC-135/707 with Stage 3 hushkit.
|
Block diagram for Systems mods developed by TAS
|
TAS develops CAD drawings in multiple formats
|
Plot showing aerodynamic pressures
|
